|
|
Series WT
WT 10 · WT 12 · WT 15 · WT 18
WT 15 SJ · WT 20 SJ · WT 25 SJ |
|
 |
|
|
|
|
 |
|
|
|
|
Performance profile
The WT series of high performance shredders are ideally suited for processing a
wide range of plastics, in particular difficult, flexible materials such as
foils, filaments, bags, ribbons and tapes,
carpet, textiles, foam and all loose and non-bulky waste materials.
The swing arm WING-RAM ensures safe feeding, even of contaminated or damp
materials.
Thanks to a very large hopper, WT shredders can be supplied without manual
assistance, by conveyor belt, fork-lift truck, crane or wheel loader. The
various sizes and different versions make it possible to adapt the machine for
all applications. |
|
|
|
The WT Series - an overview |
| SPECIFICATIONS |
WT 10 |
WT 12 |
WT 15 |
WT 18 |
|
|
|
|
|
|
| Number of knives (pcs.) |
51 (34) |
60 (49) |
78 (52) |
93 (62) |
| Feed opening (mm) |
1.000x1.160 |
1.200x1.160 |
1.500x1.160 |
1.800x1.160 |
| Rotor width (mm) |
1.000 |
1.200 |
1.500 |
1.800 |
| Rotor-Ø (mm) |
368 |
368 |
368 |
368 |
| Rotor speed (RpM) |
110 |
110 |
110 |
110 |
| Motor performance (kW) |
45/55/75 |
55/75/90 |
75/90/110 |
90/110 |
| Screen perforation (mm) |
15 - 100 |
15 - 100 |
15 - 100 |
15 - 100 |
| Weight (kg) approx.* |
4.500 |
5.200 |
8.700 |
10.000 |
|
| Typ |
WT 15 SJ |
WT 20 SJ |
WT 25 SJ |
|
|
|
|
|
|
|
| Number of knives (pcs.) |
63 (51) |
87 (72) |
111(102) |
|
| Feed opening (mm) |
1.500x1.835 |
2.000x1.835 |
2.500x1.835 |
|
| Rotor width (mm) |
1.500 |
2.000 |
2.500 |
|
| Rotor-Ø (mm) |
600 |
600 |
600 |
|
| Rotor speed (RpM) |
68 |
68 |
68 |
|
| Motor performance (kW) |
75/90/110 |
90/110/160 |
160/200 |
|
| Screen perforation (mm) |
15 - 100 |
15 - 100 |
15 - 100 |
|
| Weight (kg) approx.* |
11.500 |
14.500 |
17.000 |
|
|
| * This may vary according to equipment
and drive performance of the machine. |
 |
| |
| EQUIPMENT |
Standard series equipment
- E-rotor with welded-on or screwed-on knife holders
- concave-ground cutting knives
- hydraulic swing arm WING-RAM, guide pusher with turbo hydraulics and
segment floor, load-sensitive control
- hydraulic lift up screen basket for quick access to rotor
- low maintenance, offset and sealed rotor bearings
- choice of contactor or stored programm control (PLC)
Options
- patented V-rotor for optimum even cutting geometry
- second overhead counter-knife
- Supercut for precise adjustment of cutting gap
- rotor cooling
- hydraulic oil and gearbox oil cooling
- Hardox coating for rotor
Drive
WT shredders are available with the option of mechanical, hydraulic or patented
high-torque CDW drive (Compact Drive WEIMA).
Options for increased safety: gearbox limit switch, reverse counter,
hydrodynamic clutch, KTR safety clutch, safety switch. |
|
|
|
Top of page |
Download Brochure | Inquiry |
| |
|
 |
|
| © WEIMA Maschinenbau GmbH · August 2008 |
|
|
|
|
|
